Bosch B810 Handleiding
Hier is de Bosch B810 (Niet gecategoriseerd) gebruikershandleiding. 3 pagina's in taal Engels met een gewicht van 0.2 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/3
Intrusion Alarm Systems | B810 Wireless SDI2 bus interface
B810 Wireless SDI2 bus interface
www.boschsecurity.com
uDual internal antennas provide spatial and polar RF
signal reception for high reliability
uCover and wall tamper protection
uMultiple device enrollment options as well as RF
diagnostics ensure efficient and effective installation
uSupports supervision of wireless points (504),
keyfobs (1000), and repeaters (8)
uExternal status LEDs
RADION wireless from Bosch provides the range,
scalability and exceptional battery life required to
ensure reliable performance and superior quality.
Advanced diagnostics and multiple device enrollment
options make installation and maintenance simple and
cost effective. With a complete line of peripherals,
RADION provides the flexibility for virtually any
application requirement.
System overview
The B810 is a wireless receiver that connects RADION
wireless peripherals such as the motion and specialty
detectors, keyfobs, panic buttons, door window
contacts, repeaters, and more, to supported Bosch
control panels using the SDI2 Bus connection.
The receiver supports RF communication at 433.42
MHz This frequency features improved penetration,
reflection, and refraction of signal for superior range,
and reliability. The receiver also features dual
antennas to achieve spatial and polar diversity to
further improve RF communication reliability. Enclosed
within the receiver housing for higher security, the
receiver is equipped with tamper protection, and
detects and reports radio frequency interferences. The
receiver supports supervision of wireless points (504),
key fobs (1000), and repeaters (8).
The receiver can be easily accessed and configured for
a compatible control panel using the address switch
on the back of the receiver housing. The receiver
address switch provides a single-digit setting for the
receiver’s address, allowing for ease of installation.
Functions
The receiver uses the RADION wireless protocol which
supports:
• SDI2 bus communication
• Tamper input processing
• RF interference (jamming) detection and reporting
• Signal strength and margin reporting
• Enroll Device Database management
Address switch addressing
Use the address switch to easily assign a bus address
or setup during installation.
Easy installation
The sliding self-locking enclosure has an integrated
bubble level and a custom gap-free, lift gate style
terminal block to make installation easier, faster, and
more reliable.
Probleemoplossing Bosch B810
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Wit |
| Breedte: | 139.7 mm |
| Diepte: | 209.6 mm |
| Hoogte: | 31.8 mm |
| Temperatuur, in bedrijf: | 0 - 49 °C |
| Aantal per verpakking: | 1 stuk(s) |
| Ingangsspanning: | 12 V |
| Bedrijfstemperatuur (T-T): | 0 - 49 °C |