Chief Projector accessoire SLM2100

Chief SLM2100 Handleiding

Hier is de Chief SLM2100 (Projector accessoire) gebruikershandleiding. 1 pagina's in taal Engels met een gewicht van 0.1 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.

Pagina 1/1

8850-000143 08/02/07

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com

INSTALLATION INSTRUCTIONS

SLB-2100 HANGER RACKETB

for Luxeon D520P, Vivitar DLP-2100S, DLP-2100X,

Prior to assembly, unpack carton and verify contents.

For security installation, use security hardware package inside the ALL-POINTS™

Security Kit. Follow the instructions below for attaching the bracket to the projector

using either standard hardware or security hardware.

If you are missing any of the following components, please contact Customer Service at

1-800-582-6480

(1) SLB-2100 Bracket (3) M4 -12mm Flat Head Screw

(3) 10 - 24 Thumb Nuts (3) 1/2" x .218 x 1/4" Nylon Spacer

INSTALLATION INSTRUCTIONS

1. Turn projector upside down.

2. Place the three ¼” nylon spacers over the three threaded inserts in the bottom of the

projector.

3. Place the SLB2100 bracket onto the three ¼” nylon spacers on the bottom of the

projector lining up the three mounting holes in the bracket with the three nylon spacers.

4. Using the three M4 x 12mm screws start them into the three threaded inserts and tighten

all fasteners at this time, securing the bracket to the projector. CAUTION: When

attaching the mount be careful not to overtighten screws.

5. See RPA and/or Smart-Lift™ Instructions.

Probleemoplossing Chief SLM2100

Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp