DeWalt
Niet gecategoriseerd
DC9071
DeWalt DC9071 Handleiding
Hier is de DeWalt DC9071 (Niet gecategoriseerd) gebruikershandleiding. 4 pagina's in taal Engels met een gewicht van 0.5 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/4
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY DEWALT PRODUCT, CALL US TOLL FREE AT
1-800-4-DEWALT (1-800-433-9258).
The batteries in your new battery pack are not fully charged! First read
the safety instructions, then follow charging notes and procedures.
Important Safety Instructions
WARNING: When using electric tools, basic safety pre-
cautions should always be followed to reduce risk of fire,
electric shock, and personal injury, including the following:
READ ALL INSTRUCTIONS
•Do not incinerate the battery pack even if it is severely dam-
aged or is completely worn out. The battery pack can explode
in a fire.
•A small leakage of liquid from the battery pack cells may
occur under extreme usage or temperature conditions. This
does not indicate a failure. However, if the outer seal is broken
and this leakage gets on your skin:
a. Wash quickly with soap and water.
b. Neutralize with a mild acid such as lemon juice or vinegar.
c. If battery liquid gets into your eyes, flush them with clean water
for a minimum of 10 minutes and seek immediate medical
attention. (MEDICAL NOTE: The liquid is 25-35% solution of
potassium hydroxide.)
• Charge the battery packs only in DEWALT chargers.
•DO NOT splash or immerse in water or other liquids.
• Do not store or use the tool and battery pack in locations
where the temperature may reach or exceed 105°F (40˚) (such
as outside sheds or metal buildings in summer).
•DO NOT probe pack with conductive objects.
• Maintain clean and open vent holes.
NOTE: Review and observe all of the Important Charging Notes in
the DEWALT charger instruction manual.
DANGER: Never attempt to open the battery pack for any reason.
If battery pack case is cracked or damaged, do not insert into charg-
er. Electric shock or electrocution may result. Damaged battery
packs should be returned to service center for recycling.
CAUTION: Battery pack must be securely attached to tool. If bat-
tery pack is detached, personal injury may result.
NOTE: Battery storage and carrying caps are provided
for use whenever the battery is out of the tool or charger.
Remove cap before placing battery in charger or tool.
WARNING: Do not store or carry battery so that
metal objects can contact exposed battery terminals.
For example, do not place battery in aprons, pockets, tool
boxes, product kit boxes, drawers, etc., with loose nails, screws, keys,
etc. without battery cap. Transporting batteries can possibly cause
fires if the battery terminals inadvertently come in contact with
conductive materials such as keys, coins, hand tools and the
like. The US Department of Transportation Hazardous Material
Regulations (HMR) actually prohibit transporting batteries in
commerce or on airplanes (i.e., packed in suitcases and carry-on
luggage) UNLESS they are properly protected from short circuits. So
when transporting individual batteries, make sure that the battery
terminals are protected and well insulated from materials that could
contact them and cause a short circuit.
The RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling
Corporation) Seal on the nickel-cadmium battery (or
battery pack) indicates that the costs to recycle the bat-
tery (or battery pack) at the end of its useful life have
already been paid by DEWALT. In some areas, it is ille-
gal to place spent nickel-cadmium batteries in the trash or municipal
solid waste stream and the RBRC program provides an environmen-
tally conscious alternative.
RBRC™ in cooperation with DEWALT and other battery users, has
established programs in the United States to facilitate the collection
of spent nickel-cadmium batteries. Help protect our environment and
conserve natural resources by returning the spent nickel-cadmium
battery to an authorized DEWALT service center or to your local retail-
er for recycling. You may also contact your local recycling center for
information on where to drop off the spent battery.
RBRC™ is a registered trademark of the
Rechargeable Battery Recycling
Corporation.
Three Year Limited Warranty
DEWALT will repair, without charge, any defects due to faulty materi-
als or workmanship for three years from the date of purchase. This
warranty does not cover part failure due to normal wear or tool abuse.
For further detail of warranty coverage and warranty repair informa-
tion, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-
9258). This warranty does not apply to accessories or damage
caused where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other rights
which vary in certain states or provinces.
In addition to the warranty, DEWALT tools are covered by our:
1 YEAR FREE SERVICE
DEWALT will maintain the tool and replace worn parts caused by nor-
mal use, for free, any time during the first year after purchase.
2 YEARS FREE SERVICE ON
XRP
™ BATTERY PACKS
DC9096, DC9091 and DC9071
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
DEWALT Power Tool, Laser, or Nailer for any reason, you can return
it within 90 days from the date of purchase with a receipt for a full
refund – no questions asked.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-DEWALT for a free
replacement.
Français
SI VOUS AVEZ DES QUESTIONS OU VOUS VOULEZ NOUS
FAIRE PART DE VOS COMMENTAIRES CONCERNANT CET
OUTIL OU TOUT AUTRE OUTIL DEWALT, COMPOSEZ SANS
FRAIS LE : 1 800 433-9258. (1-800-4-DEWALT).
Les piles de l’ensemble ne sont pas complètement chargées. Il faut
d’abord lire les mesures de sécurité, puis suivre les consignes rela-
tives au chargement.
Importantes mesures de sécurité
AVERTISSEMENT : Afin de réduire les risques d’in-
cendie, de secousses électriques ou de blessures
lorsqu’on utilise des outils électriques, il faut toujours
respecter les mesures de sécurité suivantes.
LIRE TOUTES LES DIRECTIVES
•NE PAS incinérer le bloc-pile même s’il est gravement
endommagé ou complètement usé, car il pourrait exploser en
présence de flammes.
•Les cellules peuvent subir une fuite légère par suite d’un
usage extrême ou d’une exposition à certaines températures;
cela n’indique pas un problème. Cependant, si le scellant externe
est percé et le liquide entre en contact avec la peau, on doit:
a. se laver rapidement la partie du corps touchée avec de l’eau
savonneuse;
b. neutraliser l’effet au moyen d’un acide doux tel que du jus de
citron ou du vinaigre;
c. si les yeux sont touchés, les rincer à fond avec de l’eau propre
pendant au moins 10 minutes et consulter immédiatement un
médecin. (REMARQUE AUX FINS MÉDICALES : ce liquide
contient une solution composée de 25 à 35 % d’hydroxyde de
potassium).
Probleemoplossing DeWalt DC9071
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Merk: | DeWalt |
| Categorie: | Niet gecategoriseerd |
| Model: | DC9071 |