Panasonic Hifi systeem SC-AKX56

Panasonic SC-AKX56 Handleiding

Hier is de Panasonic SC-AKX56 (Hifi systeem) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 1.6 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.

Pagina 1/2

Do the procedures with the remote control. You can

also use the buttons on the main unit if they are the

same.

Your system and the illustrations can look differently.

These operating instructions are applicable to the following

system.

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases,

on this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

• Do not let metal objects fall inside this unit.

CAUTION!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit

is well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not place sources of naked flames, such as lighted

candles, on this unit.

• Set the unit up on an even surface away from direct

sunlight, high temperatures, high humidity, and excessive

vibration.

• This unit is intended for use in moderate climates.

• The mains plug is the disconnecting device. Install this

unit so that the mains plug can be unplugged from the

socket outlet immediately.

• This unit may receive radio interference caused by

mobile telephones during use. If such interference

occurs, please increase separation between this unit and

the mobile telephone.

• This unit utilizes a laser. Use of controls or adjustments

or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

Battery

• Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

• When disposing the batteries, please contact your local

authorities or dealer and ask for the correct method of

disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and windows

closed.

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese battery.

• Do not use the battery if the cover has peeled off.

• Remove the battery if you do not use the remote control

for a long period of time. Keep in a cool, dark area.

– If you see this symbol –

Supplied accessories

Check and identify the supplied accessories.

1 x AC mains lead

1 x AM loop antenna

1 x FM indoor antenna

1 x Remote control battery

1 x Remote control

(N2QAYB000850)

System SC-AKX56

Main unit SA-AKX56

Speakers SB-AKX76

Information on Disposal in other Countries outside

the European Union

This symbol is only valid in the European

Union.

If you wish to discard this product, please

contact your local authorities or dealer and ask

for the correct method of disposal.

Operating Instructions

CD Stereo System

Model No. SC-AKX56

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

Panasonic Corporation

Web Site: http://panasonic.net

RQT9793-L

L0313HH0

PSet the play menu item

QInternal memory playlist operation

RSelect the option

SSet the edit mode for USB and internal memory

TInternal memory playlist direct buttons

Press and hold to add a track to the corresponding playlist.

Press to select the playlist.

URemote control sensor

Distance: Within approximately 7 m

Angle: Approximately 20° up and down, 30° left and right

VUSB port ( )

USB recording indicator

WDisplay panel

XBrowse playlist of the internal memory

Browse tracks or albums

Turn [CONTROL] to browse the track.

Press [4 9/ ] to start playback from the selection.

Press [ALBUM/TRACK] to select album or track and then turn [CONTROL] to browse.

Press [4 9/ ] to start playback from the selection.

Set the illumination effect

Press and hold [– ILLUMINATION] and then turn [CONTROL] to select the desired

setting.

YOpen or close the disc tray

ZMusic port jack

aDisc tray

MUSIC PORT

OPEN

RADIO/

EXT-IN

TUNE MODE

ALBUM/TRACK

ILLUMINATION

CONTROL

–

VOLUME

- SUPER WOOFER

D.BASS

MANUAL EQ

PRESET EQ

USB REC

MEMORY REC

USB

MEMORY/

Specifications

Amplifier section

RMS output power stereo mode

Front Hi 250 W per channel (3 ȍ), 1 kHz, 30% THD

Front Lo 250 W per channel (3 ȍ), 100 Hz, 30% THD

Total RMS stereo mode power 1000 W (30% THD)

Tuner, terminals section

Preset station FM 30 stations

AM 15 stations

Frequency modulation (FM)

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals 75 ȍ (unbalanced)

Amplitude modulation (AM)

Frequency range 522 kHz to 1629 kHz (9 kHz step)

520 kHz to 1630 kHz (10 kHz step)

Music port (front)

Sensitivity 100 mV, 4.7 kȍ

Terminal Stereo, 3.5 mm jack

AUX input Pin jack

Disc section

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3 )

Pick up

Wavelength 790 nm (CD)

Audio output (disc)

Number of channels 2 ch (FL, FR)

FL = Front left channel

FR = Front right channel

MPEG-1 Layer 3

Internal memor y section

Memory

Memory size 2 GB

Media file format support MP3 (*.mp3)

Memory recording

Bit rate 128 kbps

Memory recording speed 1x, 3x max (CD only)

Recording file format MP3 (*.mp3)

Capacity of total songs recorded 510 songs

(use 128 kbps, approximately 1 song = 4 mins)

USB section

USB port

USB standard USB 2.0 full speed

Media file format support MP3 (*.mp3)

USB device file system FAT12, FAT16, FAT32

USB port power 500 mA (max)

Bit rate 16 kbps to 320 kbps (playback)

USB recording

Bit rate 128 kbps

USB recording speed 1x, 3x max (CD only)

Recording file format MP3 (*.mp3)

Speaker section

Type 3 way, 3 speaker system (bass reflex)

Speaker unit(s)

Super Woofer 20 cm cone type

Woofer 8 cm cone type

Tweeter 6 cm cone type

Impedance High 3 ȍ ȍ / Low 3

Output sound pressure 86 dB/W (1 m)

Frequency range 42 Hz to 28 kHz (–16 dB)

46 Hz to 23 kHz (–10 dB)

Dimensions (W x H x D) 300 mm x 401 mm x 268 mm

Mass 5.5 kg

General

Power supply AC 220 to 240 V, 50 Hz

Power consumption 108 W

Dimensions (W x H x D) 220 mm x 334 mm x 250 mm

Mass 3.3 kg

Operating temperature range 0°C to +40°C

Operating humidity range

35% to 80% RH (no condensation)

Note:

• Specifications are subject to change without notice.

Mass and dimensions are approximate.

• Total harmonic distortion is measured by the digital

spectrum analyzer.

Power consumption in standby mode

0.3 W (approximate)

Placement of speakers

Put the speakers so that the tweeter is on the outside.

Use only the supplied speakers.

You can cause damage to the system and decrease the

sound quality if you use other speakers.

Note:

• Keep your speakers more than 10 mm from the main unit

for ventilation.

• Put the speakers on a flat safe surface.

• These speakers do not have magnetic shielding. Do not

put them near TVs, PCs or other equipment easily

influenced by magnetism.

• When you play at high levels for a long period, it can

cause damage to the speakers and decrease the life of

the speakers.

• Decrease the volume in these conditions to prevent

damage:

– When the sound is distorted.

– When you adjust the sound quality.

Sound and illumination effects

Sound effects

Illumination effects

By main unit only

You can change the illumination colour on this system.

1Press and hold [– ILLUMINATION].

2Within 5 seconds, turn [CONTROL] to select the

desired setting.

CAUTION!

•Use the speakers only with the recommended

system. If not, you can cause damage to the

amplifier and speakers and can cause a fire.

Consult an approved service personnel if damage

occurs or if there is a sudden apparent change in

performance.

•Do the procedures included in these instructions

when you attach the speakers.

Tweeter

BASS

MID

TREBLE

1. Press [SOUND] to select “BASS”,

“MID” or “TREBLE”.

2. Press [Y U, ] to adjust the level

(-4 to +4).

Using the main unit

1. Press [MANUAL EQ] to select

“BASS”, “MID” or “TREBLE”.

2. Press [2 3/ ] or [5 6/ ] to

adjust the level.

SURROUND 1. Press [SOUND] to select

“SURROUND”.

2. Press [Y U, ] to select

“ON SURROUND” or

“OFF SURROUND”.

INPUT LEVEL

(For music port

source)

1. Press [SOUND] to select

“INPUT LEVEL”.

2. Press [Y, U] to select “NORMAL”

or “HIGH”.

Note:

Select “NORMAL” if the sound is

distorted during “HIGH” input level.

SUPERWOOFER 1. Press [SOUND] to select

“SUPERWOOFER”.

2. Press [Y U, ] to select “SW1”,

“SW2”, “SW3” or “OFF”.

Using the main unit

1. Press and hold

[–SUPER WOOFER].

2. Press [2 3/ ] or [5 6/ ] to

select the desired setting.

RE-MASTER 1. Press [SOUND] to select

“RE-MASTER”.

2. Press [Y U, ] to select

“ON RE-MASTER” or

“OFF RE-MASTER”.

D.BASS 1. Press [SOUND] to select

“D.BASS”.

2. Press [Y U, ] to select

“ON D.BASS”, “AUTO D.BASS”

or “OFF D.BASS”.

Using the main unit

Press [D.BASS] to select

“ON D.BASS”, “AUTO D.BASS” or

“OFF D.BASS”.

PRESET EQ Press [PRESET EQ] to select

“HEAVY”, “SOFT”, “CLEAR”,

“VOCAL” or “FLAT”.

Overview of controls

AStandby/on switch [ ]`], [1

Press to switch the unit from on to standby mode or vice versa. In standby mode, the

unit is still consuming a small amount of power.

BAlphanumeric buttons

To select a 2-digit number

Example: 16: [ 10]= =[1] [6]

To set a character

Example: B: [2]=[2]

CDelete a programmed track

Delete a selected track in a playlist

DSelect audio source

EBasic playback control

FSelect the sound effects

GStart the title search for internal memory

HView content information

Decrease the brightness of the display panel

Press and hold the button to use this function.

To cancel, press and hold the button again.

IRecording operation control

JSet the play timer and record timer

KSet the clock and timer

LSet the sleep timer

Automatically switch off the system

The auto off function switches off the system (except in radio source) if you do not use

the system for 30 minutes.

Press and hold the button to use this function.

To cancel, press and hold the button again.

MSet the program function

NAdjust the volume of the system

OMute the sound of the system

Press the button again to cancel.

“MUTE” is also cancelled when you adjust the volume or when you switch off the

system.

RADIO/

EXT-IN

SOUND PRESET EQ

EDIT

MODE

DISPLAY

DIMMER

USB

HI-SPEED

REC

MEMORY

MODE

SLEEP

PLAY/

REC

AUTO OFF

MEMORY

ABC

DEF

GHI

QRS

TUV

XYZ

JKL

MNO

Limited warranty (ONLY FOR AUSTRALIA)

Panasonic Australia Pty. Limited

ACN 001 592 187 ABN 83 001 592 187

1 Innovation Road, Macquarie Park NSW 2113

PRO-031-F11 Issue: 4.0 01-01-2011

If you require assistance regarding warranty conditions or any other enquiries, please visit the

Panasonic Australia website www.panasonic.com.au 132 600 or contact by phone on

If phoning in, please ensure you have your operating instructions available.

THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)

SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES

Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary dependant on product. For advice on exact Authorised Service

Centre locations for your product, please telephone our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator.

In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the Australian Consumer Law. If there is a major failure with the product, you

can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are also entitled to

have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure.

If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by contacting the Panasonic Customer Care Centre. If the failure in the product is

not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable period of time from receiving notice from you.

The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product withou

charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period.

This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors or Dealers and only where the products are used and serviced within

Australia or it's territories. Warranty cover only applies to service carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when warranty service is requested.

This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as noted in the operating instructions) under normal use and reasonable car

(in the opinion of Panasonic). The warranty covers normal domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse

neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised person

(including unauthorised alterations), introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, exposure to abnormally corrosiv

conditions or any foreign object or matter having entered the product.

This warranty does not cover the following items unless the fault or defect existed at the time of purchase:

(a) Cabinet Part(s) (e) DVD, Blu-ray or Recordable Discs

(b) Video or Audio Tapes (

) Video / Audio Heads from wear and tear in normal use

(d) User replaceable Batteries (h) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s) etc

Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover

(a) Internet and or DLNA connection / setup related problems

(b) Access fees and or charges incurred for internet connection

(d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or any other device.

To claim warranty service, when required, you should:

• Telephone Panasonic’s Customer Care Centre on 132600 or visit our website referred to below and use the Service Centre Locator for the name/address of the nearest Authorised Service Centre.

• Send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase date. Please note that freight and insurance to and / or

from your nearest Authorised Service Centre must be arranged by you.

• Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the normal operating areas of the nearest Authorised Service Centres:

- Plasma/LCD televisions / displays (screen size greater than 103 cm)

The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or re-installation of a product, including costs related to the mounting, de-mounting o

remounting of any screen, (and any other ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude